Tablette durcie STP-800

La tablette durcie STP-800 fonctionne sous Android 7.1, elle dispose d’une batterie longue durée 8000mAh, un ecran 8 pouces haute définition et d’un niveau de protection IP65 permettant une utilisation pour tous types d’applications industrielles indoor ou outdoor tel que la logistique, l’entreposage, la vérification d’identité, la lecture des compteurs etc.

Légère et doté d’un design haut de gamme, la tablette durcie STP-800 dispose de plusieurs fonctionnalités modulables tel que la RFID, lecture de codes-barres, la reconnaissance de l’iris et des empreintes digitales, l’infrarouge, etc

Catégories : , ,

Description

Physical Characteristics
Dimensions 250.8mm x 152mm x 15mm/ 9.87 x 5.98 x 0.59in(for standard version)
Weight 700g/24.7oz(for standard version)
Display 8 » IPS LTPS 1920×1200
Touch Panel Corning Gorilla Glass, multi-touch panel, gloves and wet hands supported
Power Main battery: Li-ion, rechargeable, 8000mAh
Standby: over 500 hours
Continuous use: over 10 hours (depending on user environment)
Charging time: 5-7 hours (with standard AC adaptor and USB cable)
Expansion Slot 1 slot for SIM card, 1 slot for TF card, 2 optional slots for PSAM cards (ISO7816 T=0, T=1 protocol)
Interfaces USB 3.0 Type-C, OTG
Audio Speaker, microphone
Keypad 1 front key, 1 volume key, 1 power key
Sensors Gravity sensor
User Environment
Operating Temp. -4°F to 122°F / -20°C to 50°C
Storage Temp. -40°F to 158°F / -40°C to 70°C
Humidity 5%RH – 95%RH non condensing
Drop Specification Multiple 1.5m/4.9ft drops (at least 20 times) to the concrete across the operating temperature range
Tumble Specification 500 x 0.5m/1.64ft falls at room temperature
Sealing IP65 per IEC sealing specifications
ESD ±15KV air discharge, ±8KV conductive discharge
Performance
CPU Qualcomm 2GHz Octa-core
RAM+ROM 2GB+16GB
Expansion Supports up to 128GB Micro SD card
Developing Environment
Operating System Android 7.1
SDK Chainway Software Development Kit
Language Java
Tool Eclipse / Android Studio
Communication
WLAN IEEE802.11 a/b/g/n/ac, 2.4G/5G dual-band, internal antenna
WWAN 2G: 850/900/1800/1900MHz, GPRS, EDGE
3G: CDMA EVDO:BC0
       TD-SCDMA: B34/B39
       WCDMA: B1/B2/B5/B8
4G: TDD-LTE: B38/B39/B40/B41
       FDD-LTE: B1/B2/B3/B4/B5/B7/B8/B20/B26/B28
WWAN (Others) Depending on the country’s ISP

Note:
P80 models being manufactured for Turkish Market, do not include Voice Call (Phone Call) function. WAN module included on those models only support DATA transfer.

Bluetooth Bluetooth 4.2/4.1+HS/4.0/3.0+HS/2.1+EDR
GNSS GPS/AGPS, GLONASS, BeiDou, internal antenna
Fingerprint
Sensor TCS1/TCS2 Capacitive; Optical Morpho CBM-E3
Sensing Area (mm) 12.8×18; 10.4×14.4; 14×22
Resolution (dpi) 508 dpi, 8-bit greylevel; 500 dpi, 256 greylevel
Certifications FIPS 201, STQC; FIPS PIV IQS / ISO 19794-4, MINEX & FIPS 201 complaint, STQC
Format Extraction ISO 19794, WSQ, ANSI 378, JPEG2000; ISO 19794-2/4, WSQ, ANSI 378, etc.
Security AES, DES key encryption of the host communication channel; FIPS 140-2 level 2, multiple security methods available, including image and templates encryption, template signature, secure tunneling, etc.
Fake Finger Detection Support by SDK; Latex, Gelatin, Plasticine, Kapton, Transparent Film, Silicone, Rubber, Play-doh, Graphite Or Paper
Note * This function is optional
UHF RFID
Engine CM-1 module based on Impinj Indy R2000
Frequency 865MHz-868MHz / 920-925MHz / 902-928MHz
Protocol EPC C1 GEN2 / ISO18000-6C
Antenna Circular polarization (default UHF, 3dBi ; UHF with pistol grip, 4dBi)
Power 1W (30dBm, +5dBm to +30dBm adjustable)
R/W ranges > 10m (open outdoors); > 25m (indoors)
Reading rates (circular polarization) >200 tags/s
Note * Ranges and rates depend on tags and environment
Note2 * This function is optional
PSAM
Protocol ISO7816
Slots 2 PSAM card slot
Note * This function is optional
InfraRed
Wavelength 940nm
Frequency 38kHz
Range > 4m
Protocol DLT_645-2007, DLT_645-1997
Note * This function currently only has an interface reserved.
Barcode Scanning
Scan engine Zebra SE4710 (standard), Zebra SE4850 (optional)
1D Symbologies UPC/EAN, Code128, Code39, Code93, Code11, Codabar, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, MSI, RSS, etc.
2D Symbologies PDF417, MicroPDF417, Composite, RSS, TLC- 39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX), etc.
Note * This function is optional
Camera
Camera 13MP Autofocus with flash
Front Camera 8MP
NFC
Frequency 13.56MHz
Protocol ISO14443A/B, ISO15693, NFC-IP1, NFC-IP2, etc.
Chips M1 card (S50, S70), CPU card, NFC tags, etc.
Range 2-4cm
Note * This function is optional
Note2 *NFC is alternative to HF RFID
HF RFID
Frequency 13.56MHz
Note * This function is optional
Note2 * HF RFID is alternative to NFC
Iris Recognition
Rate <150ms
Range 20-40cm
FAR 1/10000000
Note Protocol:ISO/IEC 19794-6,GB/T 20979-2007
Note2 * This function currently only has an interface reserved.
* Front Iris

La tablette durcie STP-800 fonctionne sous Android 7.1, elle dispose d’une batterie longue durée 8000mAh, un ecran 8 pouces haute définition et d’un niveau de protection IP65 permettant une utilisation pour tous types d’applications industrielles indoor ou outdoor tel que la logistique, l’entreposage, la vérification d’identité, la lecture des compteurs etc.

Légère et doté d’un design haut de gamme, la tablette durcie STP-800 dispose de plusieurs fonctionnalités modulables tel que la RFID, lecture de codes-barres, la reconnaissance de l’iris et des empreintes digitales, l’infrarouge, etc

 

Adapter(EU)

PWR-P80-5V2A-EU

Adapter(UK)

PWR-P80-5V2A-UK

Adapter(US)

PWR-P80-5V2A-US

USB Cable

DC-P80-TypeC

Sim Tray Ejector

SIM-TRAY-EJECTOR

Wristband

SG-P80-HDSTP

Tablette STP-800

User + manual STP-800